1.
Make sure you have followed the instructions
included with the DSL modem package
and have all of the equipment setup
properly.
2. Open up your current browser and type in 192.168.0.1 and
hit “return or enter” on your keyboard. Do not include “http://
or www.” *If you are currently a Windows dialup user please
edit your connection before proceeding. This can be done in
Windows by going to “Internet Options” and checking “Never
dial a connection”. If you are on a Mac go to “System
Preferences” then “Network” and delete all of your
dialup information on the “PPP” tab. |
|
| 3.
The next screen you will see will be
the modem access screen here you will
need to enter your username@owc.net and
your password registered with OWC.
Once completed hit “Connect”.
If you don’t get this screen
you may have an older model modem.
Please see “XP DSL setup“ or “OS
X DSL setup” for these instructions. |
 |
| 4.
You will now be prompted for your modem
access code. This number is located
on a sticker underneath the DSL modem.
Enter the number and click “Continue”. |
 |
 |
| 6.
You should now be connected and you
should see your modem connection information.
You can now close the window, your
DSL connection is complete. |
 |
| |
Design Service 
