owc.net      
Email Address: Password:  
     
 
   
WIN 98 Complete Setup
   > Dial–up Service
    Broadband Services

 
   
1.Double Click on My Computer.
My Computer
2. Double Click on Dial-Up Networking.
Dial-Up Networking
3. Double Click Make a New Connection.
Make a New Connection
4. When it says "Type the name of the computer you are dialing" put OWC.
5. Click on Next.
Phone Number input
6. Type in your "Suggested Dial-In number"
7. Click Next
Completion Window
8. Click Finish
Connection Properties
9. Right click on your OWC icon.
General Tab
10. Click on Server Types button.
Serber Type
11. Click on TCP/IP Settings.
TCP-IP Settings
12. The following should be filled in:
- The black dot should be on "Server Assigned IP Address"
- The second black dot should be on "Server Assigned name server addresses"
- Both "Use IP Header Compression" and "Use default gateway on remote network" should be checked.

13. Click OK
14. Click OK again
15. Click on the start button
16. Go to settings and click Control Panel.

17. Look for Network and Double Click.
18. In the large white box under configuration click on TCP/IP or TCP/IP-Dial-up Adaptor.
Network Configuration
19.Then click properties.
20. Click OK on the little message box that will popup.
IP Address Tab
21. Under IP Address make sure the dot is in front of "Obtain IP address automatically".
22. Click on WINS Configuration tab.
WINS Configuration Tab
23. Make sure the dot on that page is set to "Disable WINS resolution".
24. Click on DNS Configuration tab.
DNS Configuration Tab
25. Fill in the following information in:
- Make sure the dot at the top is on "Disable DNS."

26.Click OK at the bottom of the screen.
27. Click OK at the bottom of the Network Screen.
28. Windows will "build a driver information database" and then ask you to restart. Tell it Yes.

 
Serving the Internet Community since 1997 All rights reserved - © 2005 Other World Computing  1004 Courtaulds Drive, Woodstock, IL  60098
DSL Dial-up ISDN refer a friend hosting websitedesign